F3658

Lighting regulator electronic dimmer EPU-1500



€314.56
  • Buy 2 for €305.54 each and save 3%

Universal lighting controller. An electronic lighting dimmer based on a transistor actuator gives the user the opportunity to use the device at many types of load::

  • LED lighting
  • energy-saving lighting
  • ordinary standard lighting

Electronic universal controller control over the lighting. With this device, you can set the minimum or maximum illumination of lighting. An additional advantage of the electronic lighting controller is the function of controlling an external analog signal 0-10V coming from e.g. fermo climate controller FT-40, F-Pro 2 or F-Pro 4 which gives the possibility of setting the lighting in direct proportion to sunrises and sunsets.

Installation of the electronic lighting regulator is easy and fast, and its operation is 100% intuitive.

Technical specification:
  • Supply voltage: 230 VAC (+/- 10 % max.) sinusoidal, 50/60 Hz, 1-phase+neutral
  • Pre-protection: 16 A max.
  • Power consumption: 2.5 W Heat loss: 5.35 W
  • Operating temperature: -10°C to +45°C
  • Wire cross-sections: 0,75 to 2,5 mm2
  • Enclosure protection class: IP 20
  • Mounting method: for DIN-35mm rail
  • Compliance with standards: EN 60669-1, EN 60669-2-1, EN 55015
  • Button input: 230 VAC, possibility of connecting backlit buttons (= Terminal 12) (=5 mA max.), max. cable length 50 m. ,
  • Signal input 0-10 VDC: 1.5 mA, possibility to connect a potentiometer
  • Relay contact: 250 VAC/30 VDC - 4 A max.
  • Alarm output: N-MOSFET; OD (open drain); 12/24 VDC-200 mA max.
  • Fast shipping

    14 days
    for return

    Over 500,000
    satisfied customers

    Availability
    In stock

    Universal lighting controller. An electronic lighting dimmer based on a transistor actuator gives the user the opportunity to use the device at many types of load::

    • LED lighting
    • energy-saving lighting
    • ordinary standard lighting

    Electronic universal controller control over the lighting. With this device, you can set the minimum or maximum illumination of lighting. An additional advantage of the electronic lighting controller is the function of controlling an external analog signal 0-10V coming from e.g. fermo climate controller FT-40, F-Pro 2 or F-Pro 4 which gives the possibility of setting the lighting in direct proportion to sunrises and sunsets.

    Installation of the electronic lighting regulator is easy and fast, and its operation is 100% intuitive.

    Technical specification:
  • Supply voltage: 230 VAC (+/- 10 % max.) sinusoidal, 50/60 Hz, 1-phase+neutral
  • Pre-protection: 16 A max.
  • Power consumption: 2.5 W Heat loss: 5.35 W
  • Operating temperature: -10°C to +45°C
  • Wire cross-sections: 0,75 to 2,5 mm2
  • Enclosure protection class: IP 20
  • Mounting method: for DIN-35mm rail
  • Compliance with standards: EN 60669-1, EN 60669-2-1, EN 55015
  • Button input: 230 VAC, possibility of connecting backlit buttons (= Terminal 12) (=5 mA max.), max. cable length 50 m. ,
  • Signal input 0-10 VDC: 1.5 mA, possibility to connect a potentiometer
  • Relay contact: 250 VAC/30 VDC - 4 A max.
  • Alarm output: N-MOSFET; OD (open drain); 12/24 VDC-200 mA max.
  • Log in to add your opinion

    Login
    Ask a question about product
    Ask a question about product Lighting regulator electronic dimmer EPU-1500